2014 Drinking Water Report
PWSID: 1270051
City of Shorewood
2014 Drinking Water Report
The City of Shorewood is issuing the results of monitoring done on its drinking water for the period from January 1 to
December 31, 2014. The purpose of this report is to advance consumers’ understanding of drinking water and heighten
awareness of the need to protect precious water resources. The 2014 Drinking Water Report is not being directly mailed
to all customers, but a copy is available upon request by calling 952-960-7900.
Source of Water
The City of Shorewood provides drinking water to its residents from the following groundwater sources:
Purchases treated water from the City of Chanhassen which obtains its water from wells in the Prairie Du Chien-
Jordan and Prairie Du Chien-Galesville aquifers
Six wells ranging from 326 to 640 feet deep, that draw water from the Prairie Du Chien-Jordan, Prairie Du Chien
Group, and Tunnel City-Wonewoc aquifers.
The Minnesota Department of Health has made a determination as to how vulnerable our systems' source(s) of water
may be to future contamination incidents. If you wish to obtain the entire source water assessment regarding your
drinking water, please call 651-201-4700 or 1-800-818-9318 (and press 5) during normal business hours. Also, you can
view it on line at www.health.state.mn.us/divs/eh/water/swp/swa.
Call 952-960-7900 if you have questions about the City of Shorewood drinking water or would like information about
opportunities for public participation in decisions that may affect the quality of the water.
Results of Monitoring
No contaminants were detected at levels that violated federal drinking water standards. However, some contaminants
were detected in trace amounts that were below legal limits. The table that follows shows the contaminants that were
detected in trace amounts last year. (Some contaminants are sampled less frequently than once a year; as a result, not
all contaminants were sampled for in 2014. If any of these contaminants were detected the last time they were sampled
for, they are included in the table along with the date that the detection occurred.)
Key to abbreviations:
MCLGMaximum Contaminant Level Goal: The level of a contaminant in drinking water below which there is no known
─
or expected risk to health. MCLGs allow for a margin of safety.
MCLMaximum Contaminant Level: The highest level of a contaminant that is allowed in drinking water. MCLs are set
─
as close to the MCLGs as feasible using the best available treatment technology.
MRDLMaximum Residual Disinfectant Level.
─
MRDLGMaximum Residual Disinfectant Level Goal.
─
1
PWSID: 1270051
ALAction Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirement
─
which a water system must follow.
90th Percentile LevelThis is the value obtained after disregarding 10 percent of the samples taken that had the highest
─
levels. (For example, in a situation in which 10 samples were taken, the 90th percentile level is determined by
disregarding the highest result, which represents 10 percent of the samples.) Note: In situations in which only 5
samples are taken, the average of the two with the highest levels is taken to determine the 90th percentile level.
pCi/lPicoCuries per liter (a measure of radioactivity).
─
ppmParts per million, which can also be expressed as milligrams per liter (mg/l).
─
ppbParts per billion, which can also be expressed as micrograms per liter (μg/l).
─
ndNo Detection.
─
N/ANot Applicable (does not apply).
─
Level Found
Range Average/
Contaminant MCLG MCL Typical Source of Contaminant
Result*
(units)
(2014)
Arsenic (ppb) 0 10 N/A 6.09 Erosion of natural deposits; Runoff from orchards;
Runoff from glass and electronics production
wastes.
Barium (ppm) 2 2 N/A .06 Discharge of drilling wastes; Discharge from metal
(05/04/2011) refineries; Erosion of natural deposits.
Combined Radium 0 5.4 N/A 1.2 Erosion of natural deposits.
(pCi/l)
(04/09/2012)
Fluoride (ppm) 4 4 .95-1.1 1.01 State of Minnesota requires all municipal water
systems to add fluoride to the drinking water to
promote strong teeth; Erosion of natural
deposits; Discharge from fertilizer and aluminum
factories.
Haloacetic Acids 0 60 N/A 2.7 By-product of drinking water disinfection.
(HAA5) (ppb)
TTHM (Total 0 80 N/A .8 By-product of drinking water disinfection.
trihalomethanes)
(ppb)
*This is the value used to determine compliance with federal standards. It sometimes is the highest value detected and
sometimes is an average of all the detected values. If it is an average, it may contain sampling results from the previous
year.
While your drinking water meets EPA's standard for arsenic, it does contain low levels of arsenic. EPA's standard
balances the current understanding of arsenic's possible health effects against the costs of removing arsenic from
drinking water. EPA continues to research the health effects of low levels of arsenic, which is a mineral known to cause
cancer in humans at high concentrations and is linked to other health effects such as skin damage and circulatory
problems.
2
PWSID: 1270051
Contaminant
(units)
MRDLG MRDL **** ***** Typical Source of Contaminant
Chlorine (ppm) 4 4 .9-1.6 1.23 Water additive used to control microbes.
****Highest and Lowest Monthly Average.
*****Highest Quarterly Average.
Contaminant 90% Level # sites
(units) over AL
MCLG AL Typical Source of Contaminant
Copper (ppm) 1.3 1.3 .3 0 out of Corrosion of household plumbing systems; Erosion of
20 natural deposits.
Lead (ppb) 0 15 2.1 0 out of Corrosion of household plumbing systems; Erosion of
20 natural deposits.
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children.
Lead in drinking water is primarily from materials and components associated with service lines and home plumbing.
City of Shorewood is responsible for providing high quality drinking water, but cannot control the variety of materials
used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for
lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are
concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water,
testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at
http://www.epa.gov/safewater/lead.
Monitoring may have been done for additional contaminants that do not have MCLs established for them and are not
required to be monitored under the Safe Drinking Water Act. Results may be available by calling 651-201-4700 or 1-800-
818-9318 during normal business hours.
Compliance with National Primary Drinking Water Regulations
The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs,
springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring
minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or
from human activity.
Contaminants that may be present in source water include:
Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic
systems, agricultural livestock operations, and wildlife.
Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban
stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater
runoff, and residential uses.
Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of
industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and
septic systems.
Radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and
mining activities.
3
PWSID: 1270051
In order to ensure that tap water is safe to drink, the U. S. Environmental Protection Agency (EPA) prescribes regulations
which limit the amount of certain contaminants in water provided by public water systems. Food and Drug
Administration regulations establish limits for contaminants in bottled water which must provide the same protection
for public health.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some
contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More
information about contaminants and potential health effects can be obtained by calling the Environmental Protection
Agency’s Safe Drinking Water Hotline at 1-800-426-4791.
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-
compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ
transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at
risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC
guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants
are available from the Safe Drinking Water Hotline at 1-800-426-4791.
4